New KeepAlert Product Range:

KeepAlert Range of CO2 Monitoring and Logging Instruments KeepAlert CO2 Desktop Monitor plugs into mains power KeepAlert CO2 Handheld Monitor Battery operated KeepAlert CO2 Logger Battery operated KeepAlert CO2 Logger with Display Battery operated

Ideal instruments for Air Conditioned areas, Gardening, Hydroponics, Classrooms, Offices, Cars, Trucks, Auditoriums.

Contact OnSolution for further details.

   The LogTag Dry Ice “Probe-less” Temperature Recorders operate, measure and store up to 8000 temperature readings in environments ranging from -80°C to +40°C (-112°F to +104°F).

   Intended for use in transit monitoring of articles stored in packaging .

   incorporating dry ice cooling agents and similar low temperature applications.

    TCU temperature logger key features:

   Automatically Wakes Up, Measures Temperature, and Stores Values in 8KB of Data-Log Memory in 8- or 16-Bit Format

   Digital Thermometer Measures Temperature with 8-Bit (0.5°C) or 11-Bit (0.0625°C) Resolution

   Temperature Accuracy: ±1.5°C from +110°C to +140°C, ±7°C typical from +15°C to +110°C

   Water Resistant or Waterproof if Placed Inside DS9107 Capsule (Exceeds Water Resistant 3 ATM Requirements)

   Sampling Rate from 1s Up to 273hr

   Programmable High and Low Trip Points for Temperature Alarms

   Programmable Recording Start Delay After Elapsed Time or Upon a Temperature Alarm Trip Point

   Quick Access to Alarmed Devices Through 1-Wire Conditional Search Function

   576 Bytes of General-Purpose Memory

   Two-Level Password Protection of All Memory and Configuration Registers

   Communicates to Host with a Single Digital Signal Up to 15.4kbps at Standard Speed or Up to 125kbps in Overdrive Mode Using 1-Wire Protocol

   Operating Temperature Range: +15°C to +140°C

    TCX temperature logger key features:

   Automatically Wakes up, Measures Temperature and Stores Values in 8kB of Datalog Memory in 8- or 16-Bit Format

   Digital Thermometer Measures Temperature with 8-Bit (0.5°C) or 11-Bit (0.0625°C) Resolution

   Accuracy of ±0.5°C from +20°C to +75°C with Software Correction

   Water resistant or water proof if placed inside DS9107 capsule

   Sampling Rate from 1s up to 273hrs

   Programmable Recording Start Delay After Elapsed Time or Upon a Temperature Alarm Trip Point

   Programmable High and Low Trip Points for Temperature Alarms

   Quick Access to Alarmed Devices Through 1-Wire Conditional Search Function

   512 Bytes of General-Purpose Plus 64 Bytes of Calibration Memory

   Two-Level Password Protection of All Memory and Configuration Registers

   Communicates to Host with a Single Digital Signal at up to 15.4kbps at Standard Speed or up to 125kbps in Overdrive Mode Using 1-Wire Protocol

   Operating Range: 0°C to +125°C

    Recent new features include:

   Automatic emailing of results

   Online loggers with automatic downloading, saving and emailing

   Automatic unlock code detection when online

   PDF results

   Support for humidity loggers

    TC-Spy provides the ability to quickly:

   check if a Thermocron has had any alarms

   display the alarm date and times

   display the last temperature reading

   stop a running mission.

   restart a stopped Thermocron using the last settings.

   This makes it ideal for applications where a PC is not available.

    The new TCS Thermocron provides either:

   8,000 temperature readings with 0.5°C resolution, or

   4,000 temperature readings with 0.0625°C resolution Its range
        remains over the entire -40° to 85° range.

    The LogTag LOGDISP temperature recorder features:

   a display together with a data logging function storing up to 7770 temperature readings

   Statistical temperature and duration readings for up to 30 days can be reviewed on the display.